Click2Enter Emergency Access Control

Emergency Access Control for Gates and Doors, using your own radio transceivers. No cost to the public safety agency, because they already posses the access control device - their own radio transceiver. Don’t risk untimely delays during an emergency response. Every second counts so forcing the emergency responder to STOP their vehicle to enter a code, activate a key, or not get in at all can have a catastrophic outcome. Operate both gates and doors for a comprehensive overlay emergency access response.

Features and benefits of the NEW Click2Enter-I.V4

• Mutual Aid Control
• Stealth Operation
• Improved Response Time
• Officer Safety Friendly
• Provides Increased Security over Light & Siren Systems
• Modified scanning receiver radio
• Variable activation range via programming
• One or two radio transmission "clicks" for activation
• 100 channel capacity (primary operational bank)
• Mutual aid compatible
• Independent relay control for roll-up doors
• Bright activation led and power led
• Time/day/agency memory recall
• CTCSS, PL/DPL private line (PL) programming capability
• Auto detect and load of private line codes
• Compatible with analog or digital radio transmitters, using private line sub-audible transmissions
• Will operate with carrier only for use with digital radio systems
• Able to use talk around carriers (car to car) of trunk line radio systems
• Able to operate in an “on-trunk” mode trunk’ed radio systems (single pulse mode only)
• Able to receive radio transmissions to include all public safety bands
• Latch open and close features
• Enhanced user-programmable latch open feature lets you specify gate open periods from one minute to unlimited
• Latch back and hold feature for extra safety
• Ability to handle high power mobile transmitters and lower power hand held portable transmitters
• Proprietary programming software built into each unit
• Field programmable using either a laptop or net-book computer with terminal emulation software
• Programmable via usb standard to mini jack
• User-selected pin for security of programmed frequencies
• Able to capture and exhibit activation data log, via software
• Computer software programmable using standard terminal emulation software
• Uses regulated 12v to 24v dc @ 500ma power supplies
• Lightning surge current protection kit available
• Reflective logo for night identification.
• Unit enclosed in a nema type 4 box, with security screws supplied
• Relay or dry contact ready
• Extra set of relay contacts to activate a multitude of devices
• Retrofit kits available for operation below 0 degrees F

Click2Enter Support Downloads